MC Ju106 EP1 by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 89% (50% is perfectly square, 100% is very short pulsewave).
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 16.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 186.38Hz (56) and is modulated by LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 107.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 55.
Low-pass filter envelope amount is modulated by Note Num.
Note Num direct modulation amount for low-pass filter envelope amount is 218.
Filter has no resonance.
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Reverse Reverb fx
not yet complete
Flanger fx
not yet complete
Phase fx
not yet complete
Delay fx
not yet complete
Mod Wheel modulator
Controls Delay Param 4.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Delay Param 4 | 32 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 218 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 107 |
| name | value |
|---|---|
| LFO 2 Rate | 0.04Hz (0) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 1 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.42s (72) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0.33s (57) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 55 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.42s (72) |
| VCF Envelope Sustain Level | 100% (255) |
| VCF Envelope Release Time | 0.33s (57) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |